For fish research, broodstock, hatchery and fish passage work, Microchips Australia supplies Trovan PIT tags in two standards, FDX-A and FDX-B. Sterile 10-packs of the small Nano and Midi tags are $79. The tag standard decides which antenna you can use, so choose the two together.
This guide is for research, broodstock, hatchery and fish passage projects only. Microchips Australia (MA) does not supply tags for fish in the human food chain. For a wider introduction, see our PIT tags guide and our aquaculture page.
Smaller tags suit smaller fish. Our tags are used in fish as small as about 50mm, and the 8mm tags come in both FDX-A and FDX-B. These Trovan PIT tags come in sterile 10-packs at $79 each:
| Trovan tag | Standard | Size |
|---|---|---|
| ID100 Nano | FDX-A | 8mm x 1.25mm |
| ID100 Midi | FDX-A | 8mm x 1.4mm |
| ID162B Midi | FDX-B (ISO) | 8mm x 1.4mm |
| ID100C | FDX-A | 11.5mm x 2.1mm |
| ID162C | FDX-B (ISO) | 11.5mm x 2.1mm |
Non-sterile loose bulk tags (ID100A and ID100A Midi, both FDX-A) are $3.90 each. Send us your species and fish size and we'll help you match a tag.
This choice matters because antennas differ. If you need ISO tags, plan the antenna first.
Trovan's own standard (128 kHz). The ID100 family uses it. Flat panel antennas read FDX-A only.
The ISO 11784/11785 standard (134.2 kHz). The ID162 family uses it. FDX-B tags work with swim-through antennas and with circular and square frame antennas, which read both FDX-A and FDX-B.
MA readers are FDX-A and FDX-B, and some handheld readers, such as the LID-575 and LID-573 Multi, also read HDX. Our antennas, decoders and fish readers are FDX-A and FDX-B only. For a fixed station or sampling with the fish reader, HDX-tagged fish would need re-tagging with FDX.
Antennas are quote-only, so we don't list prices. We recommend one decoder per antenna. Please don't plan for one decoder switching between several antennas.
Salmon farms use it in research and broodstock settings to read fish moving between tanks. It reads FDX-B tags.
Optimised for ISO FDX-B. You can place several side by side to cover a wider space.
A flat panel antenna in an IP68 case, for FDX-A tags. It was used with the LID-650 decoder in the 2025 Mt Roland Land Care culvert study in Tasmania.
We can build square and circular single-coil antennas up to 300mm in any dimension. The largest custom antenna we can make for FDX-B tags is 100cm x 40cm.
Read range falls as antenna size increases, so use the smallest antenna that covers your fish passage. As a guide, the ANT-612 reads at about 20 to 25cm.
Metal also cuts range. Keep antennas at least 300mm from steel, use non-metal mounts, and sit them at least 30cm above metal surfaces.
For sorting, spawning and tank work, MA has two handheld options with public prices.
Our Aquapocket reader and fish reader with scale are quote-only. Please request a quote for them. See how to use a reader.
The Trovan FR-260 FishReader W II with Integrated Scale is a data collection station for sampling days. Scan a fish's PIT tag and its built-in scale (1 to 5kg) records the weight against that ID.
Staff then tap the details they need, such as colour, sex, length, width, appearance or deformities, on the touchscreen. You can set up to 36 data points for your study, so there's no typing.
An integrated camera takes a photo of each fish, linked to its ID. You can also take a sample, for example for genetic testing, and label it with a barcode that links it to the fish.
An external scale and a fish measuring board can be added. A QR and barcode scanner version reads small 2D barcodes on samples and test tubes. Fish readers are quote-only.
Fishway sites are often off the grid. Solar panels can extend battery life at remote reader stations (see the solar panel kit page). Sensors, such as optical beam sensors, can trigger the antenna only when a fish is present, which saves power. You source your own battery. We supply the antenna, decoder and cabling, plus solar panels if you need them.
Trovan implanters are re-usable. The IM200 syringe implanter is $8.50. The pistol implanter is $39.90 and is for ID100 Nano and 1.4mm Midi tags. For steps, see the implanting procedure.
Tell us your species, fish size, site and tag standard, and we'll suggest a setup. A quote usually arrives within one business day. Call 03 9706 3165 or email info@microchips.com.au.
Request a quote Shop PIT tags