How do you set up a remote RFID reader station for a wildlife study (burrows, feeders, culverts)?

Wildlife & Research

How do you set up a remote RFID reader station for a wildlife study?

A remote station records tagged animals automatically at burrows, feeders and culverts. Choose the chip standard first (FDX-A or FDX-B), because it decides which antenna you can use.

Microchips Australia supplies Trovan PIT tags, and we quote antennas, decoders and sensors to suit your site.

The Basics

A remote station has four parts.

A remote station reads tagged animals without anyone being there.

01

Trovan PIT tag

Implanted in each animal.

02

Antenna

Placed where the animal passes, such as a burrow entrance, a feeder or a culvert.

03

Decoder and logger

Reads the tag and records the ID.

04

Power

From a battery you source, with our solar panels if the site needs them.

Chip Standards

Pick the chip standard first.

Our readers and antennas read FDX-A and FDX-B only. We don't support HDX.

FDX-A

Trovan's own standard: the ID100 family. Flat panel antennas, such as the ANT-612, read FDX-A only.

FDX-B (ISO)

The ID162 family. FDX-B needs a walk-through, circular or square frame antenna. These all read both FDX-A and FDX-B.

Sterile 10-packs of Trovan PIT tags are $79 each, in three sizes: 8mm x 1.25mm (ID100 Nano), 8mm x 1.4mm (ID100 Midi and ID162B Midi) and 11.5mm x 2.1mm (ID100C and ID162C). Non-sterile loose bulk chips (FDX-A) are $3.90 each. See the wildlife microchips collection and the research, zoo and lab animal collection.

Antennas

Choose an antenna.

The ANT-612 reads at about 20 to 25cm. Read range drops as antennas get larger, so choose the smallest antenna that covers the spot the animal must pass.

Custom builds

We can custom-build square and circular single-coil antennas up to 300mm in any dimension. The largest custom antenna we can make for FDX-B chips is 100cm x 40cm.

1000mm x 30mm stainless steel antenna

We have also made a 1000mm x 30mm stainless steel antenna optimised for ISO FDX-B. Several can sit side by side to cover a wider space.

One decoder per antenna

We recommend one decoder per antenna. Please don't plan on one decoder switching between several antennas.

Keep clear of metal

Metal reduces read range. Keep antennas at least 300mm from steel, use non-metal mounts, and sit antennas at least 30cm above metal surfaces. Check this for any steel in your site, such as a culvert, feeder frame or gate.

Power

Power for remote sites.

Power decides how long a station can run unattended.

Solar panels

Solar panels can extend battery life. See the solar panel kit page.

Optical beam sensors

Trigger the antenna only when an animal is present. This saves power and extends battery life.

Scheduler software

Can switch readers on at set times to save battery. All LID-650 decoders support it, as an option on request.

Battery

You source your own. We supply the antenna, decoder and all the cabling, plus solar panels if you need them.

Less Handling

Tag once, read every pass.

Implant the Trovan PIT tag once. After that, the station reads the animal each time it passes, so you don't need to trap or handle it to check its ID. This suits studies where you want repeat records with minimal disturbance. For implanting steps, see our implanting procedure page.

Shopping List

What you'll need.

Item Price
Trovan PIT tags, sterile 10-pack $79
Trovan PIT tags, non-sterile loose bulk $3.90 each
Cabling Request a quote
Antennas (ANT-612, custom builds and others) Request a quote
Decoders and data loggers (such as the LID-650) Request a quote
USB datalogger, optical beam sensors, scheduler software Request a quote
Solar panels Request a quote
Good to Know
  • Choose the chip standard before you choose the antenna.
  • ANT-612 flat panel antennas read FDX-A only.
  • Larger antennas read over a shorter range.
  • Use one decoder per antenna.
  • Keep antennas 300mm from steel and 30cm above metal surfaces.
  • Beam sensors and solar panels help at sites without mains power.
Request a Quote

Planning a remote station?

Tell us your species, site and how many animals you'll tag, and we'll suggest a set-up. Antennas, decoders and sensors are quoted to suit your site. A quote usually arrives within one business day. Call 03 9706 3165 or email info@microchips.com.au.

Request a quote PIT tags in Australia

More background: wildlife microchips and RFID.